Skip to main content

Tuckpointing, repointing and brick repairs across Sydney

Mon–Fri 7am–5pm · Sat 9am–3pmastutetp@gmail.com

Tuckpointing · Artarmon

Tuckpointing in Artarmon

We restore worn tuckpointing on older brick homes in Artarmon, with the joint colour and the fine raised line matched to what your wall already has.

Parts of Artarmon sit in heritage conservation areas, so Willoughby City Council’s approval route for tuckpointing is in the heritage checks below.

Typical price$100–$180 per m², GST included. What it covers

  • 15+ years in tuckpointing
  • Free inspection and quote
  • No minimum job size
Red brick verandah wall with fine white tuck lines, white quoins and a dark brick band
Verandah tuckpointingOur work in Mosman, the North Shore

The work

How we tuckpoint.

It is time to restore tuckpointing when the white lines have cracked, washed out or fallen away, earlier patches stand out in a different colour, or the coloured mortar behind the lines has gone soft.

Recognise your wall? Send us a photo
  1. Raking out

    Old, loose mortar is cut out to a sound depth without chipping the brick edges.

  2. Colour-matched mortar

    The joints are re-filled flush in mortar tinted to blend with the brick, so the joint itself disappears.

  3. The tuck line

    A fine raised line is run along each joint, matched to the width and colour of the line that is already there.

  4. Cleaning down

    Mortar smears are cleaned off the brick face as the work goes, so the finished wall is crisp.

Our work

Our nearest tuckpointing job

Photographed on one of our own jobs.

Our work in Mosman
The same verandah wall before the work, with patchy brick and worn jointsBefore
Before: the verandah wall, Mosman
A doorway framed by white quoins in tuckpointed red brickAfter
After: the doorway and quoins, Mosman

Photo 1 of 2

Where
Mosman, the North Shore
Work
Tuckpointing, Brick repointing
  1. What is the difference between tuckpointing and repointing?

    Repointing replaces failed mortar so the wall keeps out water. Tuckpointing is a decorative finish on top of that: coloured joints with a fine raised line. Many old fronts need both, and we will tell you which yours needs before we quote.

  2. Can you tuckpoint just one wall or a damaged section?

    Yes. There is no minimum job size. Matching a section to the surrounding work is a normal part of the job.

  3. How long does tuckpointing last?

    Well-done tuckpointing typically lasts 20 to 30 years before the joints need attention again, and often longer on a sheltered wall. Weather exposure, damp and any movement in the wall shorten it, and the fine tuck line usually shows wear before the mortar behind it fails.

  4. Can painted or rendered brick be tuckpointed?

    Yes, once the coating has been taken back to sound brick. We check whether the brick underneath is worth exposing before we quote. Tuckpointing can also be added to suitable brickwork that has never had it.

Before work starts

Heritage checks before tuckpointing

On an older front the tuck line is part of how the house looks, so we restore its colour, width and profile to match the original. If you want a different colour or finish, check the heritage controls for your address first.

How to check heritage requirements
  1. Check if your street is in a conservation area

    Artarmon has heritage conservation areas, listed below with the plan that maps them. If your home is in one, check the council’s heritage requirements before work on its walls starts.

    Listed in the plan

    SourceWilloughby Local Environmental Plan 2012: heritage schedule and map (opens in a new tab)

  2. Check if your home is a heritage item

    Some homes in Artarmon are listed heritage items on the council’s heritage map. If yours is one, the work goes through the council’s heritage process, inside a conservation area or not, so check your address on the map before work starts.

    SourceNSW Planning Portal, LEP heritage map layer (opens in a new tab)

  3. Willoughby City Council: the approval route

    Willoughby City Council says like-for-like minor or maintenance works on local heritage items or buildings in heritage conservation areas may not need a development application, but you may need to request a local heritage exemption and get written confirmation before starting. Willoughby DCP Part H adds that mortar for repointing should match the colour, texture and mix of the original, noting old mortars were usually lime-based.

    SourceGain exemption from requiring development consent for heritage works (opens in a new tab)

Sources checked October 2026.

Nearby

Tuckpointing in nearby suburbs

The nearest suburbs we cover for this work.

Tuckpointing across the North Shore
Artarmon and the nearest suburbs we cover.This suburbA suburb with our photographed workMap adapted from suburb boundaries © State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW), CC BY 4.0

No minimum job size

Free inspection and quote in Artarmon.

Tell us what needs attention and where the work is. Photos are optional.

0402 133 821Monday to Friday, 7am to 5pm · Saturday, 9am to 3pm · Sunday closedastutetp@gmail.com

Sending photos? A whole-wall photo shows the size and access; a close-up shows the joints and any damage.

01The whole wall
02A close-up of the joints

Request a free quote

Phone and email are both needed so we can reach you.
Your contact details and suburb
The brickwork

A short description is fine. Tell us what needs attention and where on the property.

A whole-wall photo and a close-up of the problem are useful. Take them from a safe position.

Up to 5 photos · JPG, PNG, WebP, GIF, HEIC, or HEIF · 4 MB total after resizing.