Skip to main content

Tuckpointing, repointing and brick repairs across Sydney

Mon–Fri 7am–5pm · Sat 9am–3pmastutetp@gmail.com

We’ve worked in Strathfield

Tuckpointing in Strathfield

We restore worn tuckpointing on older brick homes in Strathfield, with the joint colour and the fine raised line matched to what your wall already has.

Strathfield is split between Strathfield Municipal Council, Burwood Council and the City of Canada Bay, with heritage conservation areas, so each council’s approval route is in the heritage checks below.

Typical price$100–$180 per m², GST included. What it covers

  • 15+ years in tuckpointing
  • Free inspection and quote
  • No minimum job size
Porch wall in tuckpointed brick around a round bullseye window
Porch and bullseye window tuckpointingOur work in Strathfield

The work

How we tuckpoint.

It is time to restore tuckpointing when the white lines have cracked, washed out or fallen away, earlier patches stand out in a different colour, or the coloured mortar behind the lines has gone soft.

Recognise your wall? Send us a photo
  1. Raking out

    Old, loose mortar is cut out to a sound depth without chipping the brick edges.

  2. Colour-matched mortar

    The joints are re-filled flush in mortar tinted to blend with the brick, so the joint itself disappears.

  3. The tuck line

    A fine raised line is run along each joint, matched to the width and colour of the line that is already there.

  4. Cleaning down

    Mortar smears are cleaned off the brick face as the work goes, so the finished wall is crisp.

Our work

Our tuckpointing work in Strathfield

The front of the house before the workBefore
Before: the front, Strathfield
Front wall and bay window after tuckpointingAfter
After: the front wall, Strathfield

Photo 1 of 2

Where
Strathfield, the Inner West
Work
Tuckpointing, Brick repointing

About this job. Our job here tuckpointed a Federation front and porch around a round bullseye window.

  1. What is the difference between tuckpointing and repointing?

    Repointing replaces failed mortar so the wall keeps out water. Tuckpointing is a decorative finish on top of that: coloured joints with a fine raised line. Many old fronts need both, and we will tell you which yours needs before we quote.

  2. Can you tuckpoint just one wall or a damaged section?

    Yes. There is no minimum job size. Matching a section to the surrounding work is a normal part of the job.

  3. How long does tuckpointing last?

    Well-done tuckpointing typically lasts 20 to 30 years before the joints need attention again, and often longer on a sheltered wall. Weather exposure, damp and any movement in the wall shorten it, and the fine tuck line usually shows wear before the mortar behind it fails.

  4. Can painted or rendered brick be tuckpointed?

    Yes, once the coating has been taken back to sound brick. We check whether the brick underneath is worth exposing before we quote. Tuckpointing can also be added to suitable brickwork that has never had it.

Before work starts

Heritage checks before tuckpointing

On an older front the tuck line is part of how the house looks, so we restore its colour, width and profile to match the original. If you want a different colour or finish, check the heritage controls for your address first.

How to check heritage requirements
  1. Check if your street is in a conservation area

  2. Check if your home is a heritage item

    Some homes in Strathfield are listed heritage items on the councils’ heritage maps. If yours is one, the work goes through the council’s heritage process, inside a conservation area or not, so check your address on the map before work starts.

    SourceNSW Planning Portal, LEP heritage map layer (opens in a new tab)

  3. Strathfield Municipal Council: the approval route

    For listed heritage items, Council says minor and maintenance works such as repointing may be carried out without development consent, but they must be confirmed by Council in writing first. Owners in conservation areas can also lodge a minor heritage works application.

    SourceHeritage Minor Works (opens in a new tab)

  4. Burwood Council: the approval route

    Minor work that doesn’t affect a building’s heritage significance may not need development consent, but you must apply on the DA Exemption – Minor Heritage Works form (fee $250) and get Council’s written confirmation before starting.

    SourceDA Exemption – Minor Heritage Works (opens in a new tab)

  5. City of Canada Bay: the approval route

    City of Canada Bay can issue a heritage exemption letter so minor works to a heritage item or in a conservation area don’t need development consent; work must not start until the letter is received. Commercial premises are excluded.

    SourceMinor works applications (heritage exemption letter) (opens in a new tab)

Sources checked October 2026.

Nearby

Tuckpointing in nearby suburbs

The nearest suburbs we cover for this work.

Tuckpointing across the Inner West
Strathfield and the nearest suburbs we cover.This suburbA suburb with our photographed workMap adapted from suburb boundaries © State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW), CC BY 4.0

No minimum job size

Free inspection and quote in Strathfield.

Tell us what needs attention and where the work is. Photos are optional.

0402 133 821Monday to Friday, 7am to 5pm · Saturday, 9am to 3pm · Sunday closedastutetp@gmail.com

Sending photos? A whole-wall photo shows the size and access; a close-up shows the joints and any damage.

01The whole wall
02A close-up of the joints

Request a free quote

Phone and email are both needed so we can reach you.
Your contact details and suburb
The brickwork

A short description is fine. Tell us what needs attention and where on the property.

A whole-wall photo and a close-up of the problem are useful. Take them from a safe position.

Up to 5 photos · JPG, PNG, WebP, GIF, HEIC, or HEIF · 4 MB total after resizing.