Skip to main content

Tuckpointing, repointing and brick repairs across Sydney

Mon–Fri 7am–5pm · Sat 9am–3pmastutetp@gmail.com

We’ve worked in Lidcombe

Tuckpointing in Lidcombe

We restore worn tuckpointing on older brick homes in Lidcombe, with the joint colour and the fine raised line matched to what your wall already has.

Lidcombe is split between Cumberland City Council and the City of Parramatta, with a heritage conservation area under Cumberland City Council’s plan, so both councils’ approval routes are in the heritage checks below.

Typical price$100–$180 per m², GST included. What it covers

  • 15+ years in tuckpointing
  • Free inspection and quote
  • No minimum job size
Brick bungalow front with tuckpointed joints
Bungalow tuckpointingOur work in Lidcombe

The work

How we tuckpoint.

It is time to restore tuckpointing when the white lines have cracked, washed out or fallen away, earlier patches stand out in a different colour, or the coloured mortar behind the lines has gone soft.

Recognise your wall? Send us a photo
  1. Raking out

    Old, loose mortar is cut out to a sound depth without chipping the brick edges.

  2. Colour-matched mortar

    The joints are re-filled flush in mortar tinted to blend with the brick, so the joint itself disappears.

  3. The tuck line

    A fine raised line is run along each joint, matched to the width and colour of the line that is already there.

  4. Cleaning down

    Mortar smears are cleaned off the brick face as the work goes, so the finished wall is crisp.

Our work

Our tuckpointing work in Lidcombe

Long side wall of the bungalow in tuckpointed brickAfter
After: the side wall, Lidcombe

Photo 1 of 1

Where
Lidcombe
Work
Tuckpointing, Brick repointing

About this job. Our job here was a brick bungalow, its front and long side wall tuckpointed.

  1. What is the difference between tuckpointing and repointing?

    Repointing replaces failed mortar so the wall keeps out water. Tuckpointing is a decorative finish on top of that: coloured joints with a fine raised line. Many old fronts need both, and we will tell you which yours needs before we quote.

  2. Can you tuckpoint just one wall or a damaged section?

    Yes. There is no minimum job size. Matching a section to the surrounding work is a normal part of the job.

  3. How long does tuckpointing last?

    Well-done tuckpointing typically lasts 20 to 30 years before the joints need attention again, and often longer on a sheltered wall. Weather exposure, damp and any movement in the wall shorten it, and the fine tuck line usually shows wear before the mortar behind it fails.

  4. Can painted or rendered brick be tuckpointed?

    Yes, once the coating has been taken back to sound brick. We check whether the brick underneath is worth exposing before we quote. Tuckpointing can also be added to suitable brickwork that has never had it.

Before work starts

Heritage checks before tuckpointing

On an older front the tuck line is part of how the house looks, so we restore its colour, width and profile to match the original. If you want a different colour or finish, check the heritage controls for your address first.

How to check heritage requirements
  1. Check if your street is in a conservation area

    Lidcombe has a heritage conservation area, listed below with the plan that maps it. If your home is in one, check the council’s heritage requirements before work on its walls starts.

    Under Cumberland City Council’s plan

    SourceCumberland Local Environmental Plan 2021: heritage schedule and map (opens in a new tab)

  2. Check if your home is a heritage item

    Some homes in Lidcombe are listed heritage items on the councils’ heritage maps. If yours is one, the work goes through the council’s heritage process, inside a conservation area or not, so check your address on the map before work starts.

    SourceNSW Planning Portal, LEP heritage map layer (opens in a new tab)

  3. Cumberland City Council: the approval route

    Before starting, notify Council in writing and receive its written advice that the work is minor or maintenance and won’t harm heritage significance. If the work isn’t exempt or minor, a development application is needed.

    SourceCumberland City Council: heritage (opens in a new tab)

  4. City of Parramatta: the approval route

    Certain minor works can be approved without a development application through a Heritage Minor Works application lodged online; Council recommends speaking to its Heritage Advisor first. Work beyond that scope needs a development application.

    SourceHeritage Minor Works application (opens in a new tab)

Sources checked October 2026.

Lidcombe and the nearest suburbs we cover.This suburbA suburb with our photographed workMap adapted from suburb boundaries © State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW), CC BY 4.0

No minimum job size

Free inspection and quote in Lidcombe.

Tell us what needs attention and where the work is. Photos are optional.

0402 133 821Monday to Friday, 7am to 5pm · Saturday, 9am to 3pm · Sunday closedastutetp@gmail.com

Sending photos? A whole-wall photo shows the size and access; a close-up shows the joints and any damage.

01The whole wall
02A close-up of the joints

Request a free quote

Phone and email are both needed so we can reach you.
Your contact details and suburb
The brickwork

A short description is fine. Tell us what needs attention and where on the property.

A whole-wall photo and a close-up of the problem are useful. Take them from a safe position.

Up to 5 photos · JPG, PNG, WebP, GIF, HEIC, or HEIF · 4 MB total after resizing.