Skip to main content

Tuckpointing, repointing and brick repairs across Sydney

Mon–Fri 7am–5pm · Sat 9am–3pmastutetp@gmail.com

Brick repointing · Northbridge

Brick repointing in Northbridge

We repoint brick and sandstone in Northbridge where the mortar has worn back, cracked or turned sandy: house walls, front fences, gate piers and chimneys, in a mix that suits the brick.

Northbridge includes a heritage conservation area, so Willoughby City Council’s approval route for repointing is in the heritage checks below.

Typical price$60–$100 per m² in cement mortar, or $80–$130 per m² in lime mortar for older walls, GST included. What it covers

  • 15+ years in tuckpointing
  • Free inspection and quote
  • No minimum job size
Rubble sandstone wall along a footpath with fresh pointing
Sandstone wall repointingOur work in Cammeray, the North Shore

The work

How we repoint.

A wall needs repointing when you can scrape the mortar out with a key, the joints sit well back from the brick face, damp shows on the inside of the wall, or plants and moss grow from the joints.

Recognise your wall? Send us a photo
  1. Looking at the wall

    From your photos, and in person if the job needs a closer look, we check how deep the damage goes, the brick and the existing mortar, and whether any bricks need replacing first.

  2. Prepare the wall

    Failed mortar is raked back to a sound depth by hand or with a fine cutter, taking care not to widen the joints or chip the bricks. The joints are cleaned of dust and dampened for the new mortar.

  3. Repoint and finish

    Mortar is packed in, finished to the profile and the wall cleaned down.

Our work

Our nearest repointing job

Photographed on one of our own jobs.

Our work in Cammeray
The sandstone wall part way through the workAfter
During the work, Cammeray
Corner of the sandstone wall beside stepsAfter
After: the corner of the wall, Cammeray

Photo 1 of 2

Where
Cammeray, the North Shore
Work
Brick repointing
  1. Is brick pointing the same as repointing?

    Yes. Brick pointing, pointing and repointing all mean renewing the mortar joints between the bricks. Tuckpointing is a decorative finish on top of that: the joints are filled in mortar coloured to the brick and a fine raised line is run along each one.

  2. Can you repoint part of a wall?

    Yes. Repointing only the worst sections is common, and there is no minimum job size. The new joints are matched to the old so the patch does not stand out.

  3. Is repointing messy?

    Raking out old mortar makes dust, so windows, doors, paths and garden beds near the wall should be masked or covered, and the wall cleaned down as the work goes. You can see it in our photos: tape round a window frame in Strathfield, a covered tiled verandah in Earlwood. Ask us how your job will be set up before the work starts.

Before work starts

Heritage checks before repointing

Many older walls were laid in soft lime mortar, and a hard cement mix in those joints can make the bricks crumble, so we repoint in a mix no harder than the brick. Changing the mortar on a heritage wall is worth checking with the council first.

How to check heritage requirements
  1. Check if your street is in a conservation area

    Northbridge has a heritage conservation area, listed below with the plan that maps it. If your home is in one, check the council’s heritage requirements before work on its walls starts.

    Listed in the plan

    SourceWilloughby Local Environmental Plan 2012: heritage schedule and map (opens in a new tab)

  2. Check if your home is a heritage item

    Some homes in Northbridge are listed heritage items on the council’s heritage map. If yours is one, the work goes through the council’s heritage process, inside a conservation area or not, so check your address on the map before work starts.

    SourceNSW Planning Portal, LEP heritage map layer (opens in a new tab)

  3. Willoughby City Council: the approval route

    Willoughby City Council says like-for-like minor or maintenance works on local heritage items or buildings in heritage conservation areas may not need a development application, but you may need to request a local heritage exemption and get written confirmation before starting. Willoughby DCP Part H adds that mortar for repointing should match the colour, texture and mix of the original, noting old mortars were usually lime-based.

    SourceGain exemption from requiring development consent for heritage works (opens in a new tab)

Sources checked October 2026.

Nearby

Brick repointing in nearby suburbs

The nearest suburbs we cover for this work.

A suburb with our photographed repointing work

Brick repointing across the North Shore

No minimum job size

Free inspection and quote in Northbridge.

Tell us what needs attention and where the work is. Photos are optional.

0402 133 821Monday to Friday, 7am to 5pm · Saturday, 9am to 3pm · Sunday closedastutetp@gmail.com

Sending photos? A whole-wall photo and a close-up of the worn joints help most.

01The whole wall
02A close-up of the joints

Request a free quote

Phone and email are both needed so we can reach you.
Your contact details and suburb
The brickwork

A short description is fine. Tell us what needs attention and where on the property.

A whole-wall photo and a close-up of the problem are useful. Take them from a safe position.

Up to 5 photos · JPG, PNG, WebP, GIF, HEIC, or HEIF · 4 MB total after resizing.